Pcl6 Emulation; Print Speeds With Various Settings - Brother DCP-7030 Service Manual

2.7.2 PCL6 emulation

You cannot print within 4.2mm (50dots in 300dpi mode) on all four sides of the paper.
2.8

Print Speeds with Various Settings

Print speed is up to 22ppm for A4 size and 23ppm for Letter size when loading A4 or Letter
size paper from the paper tray in the plain paper mode.
Actual print speed varies depending on the media type or paper size as shown in the tables
below;
<A4/Letter size>
Thin Paper
Plain Paper
Recycled Paper
Thick Paper, Envelopes, Envelopes Thin
Thicker Paper, Envelopes Thick
<Smaller size than A4 or Letter>
Thin Paper
Plain Paper
Recycled Paper
Thick Paper, Envelopes, Envelopes Thin
Thicker Paper, Envelopes Thick
Note:
• The print speed may vary according to conditions, such as paper size and paper tray.
• When a smaller size paper than A4 or Letter is printed, the temperature on both edges of
the fuser unit is much higher than the temperature on the center of the unit where the
paper is fed depending on the setting or model. Therefore, the print speed is slowed in
order to decrease the temperature on the edges after the specified time, it is maximum
print speed when you first start printing.
• The actual print speed varies depending on the paper size.
Media type setting
Media type setting
All models
11ppm (MFC7320)
20/21ppm (MFC7340)
22/23ppm
(DCP7030/7040/7045N,
MFC7440N/7840W)
10ppm
4ppm
All models
22/23ppm
300 seconds 22/23ppm →
8ppm
300 seconds 22/23ppm →
8ppm
30 seconds 22/23ppm →
8ppm
4ppm
Ref. 1-20
Confidential