Table of Contents
Advertisement
8. To allow untagged packets to participate in the new VLAN, change the Port VLAN IDs for the relevant ports in the Port Settings page.
9. Click Apply Changes to save any changes. Click Refresh if you don't want to save the changes.
Example 2
Example 2 illustrates a more complicated setup and demonstrates several scenarios for configuring VLANs.
1. Set up four VLANs, as shown in following table.
All switch ports remain as members of the default VLAN (VLAN
- Quick Links:
- Management Features
- Web Pages
- Cli Commands
Hide quick links:
Advertisement
Table of Contents
