Dell PowerConnect 5212 System User's Manual page 68

CLI Commands
The following table summarizes the equivalent CLI commands for items in the Link Aggregation/Trunk Settings page.
Command
channel-group channel-id
lacp
show interfaces status port-channel channel-id
Example
Console(config)#interface port-channel 1
Console(config-if)#exit
Console(config)#interface ethernet 1/11
Console(config-if)#channel-group 1
Console(config-if)#exit
Console(config)#interface ethernet 1/8
Console(config-if)#lacp
Console(config-if)#
Usage
Adds a port to a trunk.
Use the no form command to remove a port from a trunk.
Enables 802.3ad LACP for the current port or trunk interface.
Displays the status of an enabled trunk interface.