Removing VLAN Membership
1. Select the VLAN that you want to edit under the Show VLAN drop-down menu.
2. Change the VLAN member by clicking the port icon until the field is blank.
3. Click Apply Changes.
CLI Commands
The following table summarizes the equivalent CLI commands for items in the VLAN/VLAN Membership page.
Command
vlan database
vlan vlan-id [name vlan-name] media ethernet
[state {suspend | active}]
interface vlan vlan-id
switchport allowed vlan {add vlan-list [tagged |
untagged] | remove vlan-list}
switchport forbidden vlan {add vlan-list |
remove vlan-list}
show vlan [id vlan-id | name vlan-name]
Example
Console(config)#vlan database
Console(config-vlan)#vlan 105 name RD5 media ethernet
Usage
Allows you to enter VLAN database mode.
Configures a VLAN.
Use the no form command to restore the default or delete a VLAN.
Allows you to enter interface configuration mode for VLANs and to configure a physical interface.
Configures untagged and tagged ports.
The parameter vlan-list is the list of VLAN identifiers being added. Separate nonconsecutive VLAN identifiers
with a comma and no spaces; use a hyphen to designate a range of IDs.
Configures forbidden VLANs for a port.
Shows VLAN information.