Greenfloor Controls - Bosch GREENSTAR 30CDi Installation, Commissioning And Servicing Instructions

Greenfloor controls

Greenfloor controls are optimised for use with
Greenfloor heating systems. The range of products
includes wiring centres and components for individual
room temperature control.
Room thermostats
Single room controls allow the temperature in each room
to be set individually. The temperature is controlled by the
thermostat in relation to variable factors such as solar heat
gains, electrical devices and people. They are available as
230V wired controls or as wireless (RF) versions. Single
room thermostats are available as wall mounted models.
Wired programmable room thermostats are available as
flush mounted models.
Wiring centres
Greenfloor wiring centres provide a quick, simple and safe
means of wiring together room thermostats and actuators.
The wired unit can be used with up to six 230V room
thermostats, or programmable room thermostats. It can
also operate up to 14 actuators. There is the facility to
connect a time control which enables a night set-back mode
and an interlock to stop the manifold circulating pump from
operating. It also turns off the heat source (when all valves
are closed).
230V wiring centre
12
The wireless unit will receive
signals from up to eight
wireless thermostats and can
be wired to a maximum of
16 actuators. The unit is
supplied complete with a 7
day programmer that allows
each zone to be programmed independently
and works harmoniously with Worcester's wireless
(RF) room thermostat. To stop the manifold circulating
pump running and turning off the heat source, the unit
incorporates an interlock.
Actuators
The 230V actuators are
supplied by the Greenfloor
wiring centres and control
the water flow through each
zone, according to the room
thermostat's demand signal.
They consume as little energy
as just 2 Watts.
Room
Control
thermostat
Wired 230V
Yes
option
Wireless
Yes
(RF) option
Programmable Wiring
Actuator
room thermostat centre
Yes Yes
No Yes
Yes
Yes