Pen Features; Pen Holder And Tether - Wacom DTK-2241 User Manual

Interactive pen display

PEN FEATURES

DuoSwitch (side switch): Be sure the programmable switch is
in a convenient location where you can toggle it with your
thumb or forefinger but not accidentally press it while using
the pen. You can use the switch whenever the pen tip is
within proximity of the display screen surface; you do not
need to touch the pen tip to the display surface.
Toggle the switch in either direction to activate the button
functions. By default, the upper switch is set to D
and the lower switch is set to R
Pen tip (replaceable nib): The pen is activated as soon as it is
brought within proximity (5 mm (0.2 inch)) of the pen display
screen. This allows you to position the screen cursor without
touching the pen tip to the display screen.
When pressure is applied to the pen tip, the pen simulates a
primary mouse button click. Tip click pressure can be adjusted
in the Wacom tablet control panel.
Notes:
When not in use, place the pen in the pen storage compartment or the pen holder, or lay it flat on
your desk. To maintain the sensitivity of your pen, do not store the pen in a container where it will
rest on its tip.
Important: Use only a pen specified for use with your pen display. Other pens may not function properly.
Also, the pen tip is specifically designed for use with the pen display. If your pen display has a
coated surface, the tips on other pens could damage the pen display screen.

PEN HOLDER AND TETHER

In addition to the pen holder compartment on the top of your pen display, a pen holder and pen tether are
provided. Assembly of the pen holder is shown below. Attachment points for the tether are shown on
page 9.
Contents
C .
IGHT LICK
Contents
Index
C
OUBLE LICK
Index
11
11