Choosing Custom Multi-Touch Functions; Testing Multi-Touch; Interactive Pen Display - Wacom DTK-2241 User Manual

Interactive pen display

CHOOSING CUSTOM MULTI-TOUCH FUNCTIONS

To create custom touch gestures, select the M
Multi-touch gestures are modified based on
your selection from the drop-down menus, and
are available when selected.
Position the screen cursor over a touch option
to see a static image of that function.
If you do not choose a specific option to view,
then the control panel will display each option
sequentially, from top to bottom.
Navigating with multi-touch
See also
Choosing standard multi-touch functions

TESTING MULTI-TOUCH

If you encounter problems with multi-touch, it is a good idea to first check the assigned touch functions or
reset them to their default conditions.
To further test touch:
1. Attempt to move the screen cursor by touching your finger in different places on the display screen
surface. Touch to select an item. The status LED should brighten when you touch the display screen
surface.
2. Open the Wacom tablet control panel and click on the A
click D .... The D
IAGNOSE
tools, and appropriate information for touch-sensitive product models.
3. With the D
IAGNOSTICS
fingers. Each time you touch the display screen surface, the tablet status LED should brighten and the
T I state should change.
OUCH NFO
When you are done, click the C
Contents
and
.
dialog box shows dynamic information about the pen display and
IAGNOSTICS
dialog box open, touch the display screen surface with first one, then with two
button to exit the dialog box.
LOSE
Contents
Index
G tab.
Y ESTURES
Windows screen capture shown. Available options may
vary, depending on your operating system and version.
Windows: This tab is visible only after you select the U
W G
ACOM ESTURES
button. In the dialog box that appears,
BOUT
Index
option in the T O
OUCH PTIONS
36
SE
tab.
36