Belkin Hi-Speed USB 2.0 Pocket Hub User Manual page 9

P74081ea-F5U217ea-8-02.qxd
INSTALLATION
"Install New Hardware Wizard" may prompt you to
provide your Windows Installation CD to complete the
driver installation process).
Important Note: Hi-Speed USB 2.0 hub drivers are
included with most USB 2.0 PCI upgrade cards, and are
pre-installed along with the PCI card drivers. If you
purchased an upgrade card prior to the release of
Hi-Speed USB 2.0 hub support, please check with your
PCI card vendor for an updated USB 2.0 driver. The Belkin
Hi-Speed USB 2.0 driver supports all competitive cards
based on the NEC host controller with the exception of
Adaptec. The most recent Belkin driver is available at
www.belkin.com.
3. Plug the USB A connector of the USB device, or an
additional hub, into any of the downstream ports of
the Hub (see Fig. 2).
Important Note: When plugging a USB device into the
Hub for the first time, it may be necessary to reinstall the
USB drivers for that device. Likewise, if you move the
device to another port on the Hub, it may be necessary to
reinstall the drivers.
8/28/02 5:47 PM
(CONTINUED)
USB-A Connector
Figure 2
5
Page 5
En