Table of Contents
Advertisement
GA-7NCSV-RH Motherboard
3 ) IDE1 (IDE Connector)
An IDE device connects to the computer via an IDE connector. One IDE connector can connect
to one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or
optical drive). If you want to connect two IDE devices, please set the jumper on one IDE device
as Master and the other as Slave (for information, please refer to the instructions located on the IDE
device).
Before attaching the IDE cable, please take note of the foolproof groove in IDE connector.
4/ 5/ 6/ 7/ 8/ 9 ) S_ATA 1~6 (Serial ATA cable connectors)
SATA 3Gb/s can provide up to 300MB/s stransfer rate. Please refer to the BIOS setting for the
SATA 3Gb/s and install the proper driver in order to work properly.
SATA6
SATA5
SATA1
SATA2
SATA4
SATA3
1 7
39
40
1
2
1
7
Pin No.
Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
Advertisement
Table of Contents
