Download Print this page
American DJ LED Vision User Instructions

American DJ LED Vision User Instructions

Advertisement

Quick Links

User Instructions
7/07
Unpacking:
DJ
in perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your fixture for any damage and be
sure all accessories necessary to operate the unit has arrived intact. In
the case damage has been found or parts are missing, please contact
our toll free customer support number for further instructions. Do not
return this unit to your dealer without first contacting customer sup-
port.
Introduction:
pursuit for creating high quality affordable intelligent fixtures. The LED
Vision is a bright DMX intelligent LED special effects fixture. The LED
Vision can be used in a stand alone mode or connected in a Master/
Slave configuration. The unit can also be controlled via DMX controller.
This fixture has five operating modes: Program mode, Sound Active
mode, Auto mode, and DMX control mode.
Customer Support:
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacific Standard Time.
To purchase parts online visit http://parts.americandj.com
Warning!
not expose this unit to rain or moisture.
Caution!
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ
PLEASE recycle the shipping carton when ever possible.
American DJ
®
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
LED Vision
Thank you for purchasing the LED Vision by American
. Every LED Vision has been thoroughly tested and has been shipped
®
The LED Vision is part of American DJ's continuing
American DJ
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
support@americandj.com
To prevent or reduce the risk of electrical shock or fire, do
There are no user serviceable parts inside this unit. Do not
.
®
American DJ Supply
- www.americandj.com - LED Vision Instruction Manual Page 2
©
®
Introduction
provides a toll free customer sup-
®

Advertisement

loading

Summary of Contents for American DJ LED Vision

  • Page 1 Introduction Unpacking: Thank you for purchasing the LED Vision by American . Every LED Vision has been thoroughly tested and has been shipped ® in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate the unit has arrived intact.
  • Page 2: General Instructions

    Warranty Registration ventilation. Allow about 6” (15cm) between this device and a wall. The LED Vision carries a 3 year (1095 days) limited warranty. Please • Do not attempt to operate this unit, if it becomes damaged. fill out the enclosed warranty card to validate your purchase and war- •...
  • Page 3: Power Supply

    DMX unit. The DMX address is connectors for DATA transmission in place of 3-pin. 5-pin XLR fixtures set on the rear panel of the LED Vision. Your unit and your DMX con- may be implemented in a 3-pin XLR DMX line. When inserting stan-...
  • Page 4: Operating Modes

    Operating Instructions Operating Modes: 6. Please see pages 9-10 for DMX values and traits. You can use the LED Vision in either a stand alone mode or a master/ Sound Active Mode: slave configuration, there are 5 modes to choose from:...
  • Page 5 0 - 255 BLUE 4 100% Note: Red/Green/Blue 1, Red/Green/Blue 2, Red/Green/Blue 3, and Red/Green/Blue 4, refer to sections of the LED Vision. American DJ Supply - www.americandj.com - LED Vision Instruction Manual Page 9 American DJ Supply - www.americandj.com - LED Vision Instruction Manual Page 10 ©...
  • Page 6: Troubleshooting

    If problems are not resolved; Contact American DJ® for service. modified in any manner which American DJ, Inc. concludes, after inspection, affects the reliability of the product; if the product has been repaired or serviced by anyone other than the American DJ, 1-800-322-6337 Inc.
  • Page 7: Specifications

    ©American DJ Supply American DJ World Headquarters: 4295 Charter Street Los Angeles, CA 90058 USA Tel: 323-582-2650 / Fax: 323-582-2610 Web: www.americandj.com / E-mail: info@americandj.com American DJ Supply - www.americandj.com - LED Vision Instruction Manual Page 13 © ®...