Making A Sample Recording - Hitachi VM-1600A Instruction Manual

MAKING A SAMPLE RECORDING

MAKING A SAMPLE RECORDING
1. Connect the POWER SOURCE. (See pages 9 and 10.)
2. Press "EJECT" button and insert the cassette so the transparent window is toward
you and the arrow toward the cassette holder. Slide the cassette into cassette holder as
far as it will go.
NOTE: Push in the center of the cassette all the way until it is latched by the cassette
holder.
3. Press the cassette holder. The holder will latch in the operating position.
4. Press and hold the small button on "POWER" switch, and then slide it to the "CAM"
position. The "POWER" indicator will light and the camera/recorder will enter
record/pause mode automatically.
NOTE: If the erase prevention tab on the cassette is removed, the "TAPE" indication in the
viewfinder flasher for several seconds and the camera/recorder will not enter record/pause
mode.
22