Inserting And Removing Cassettes; Making A Sample Camera Recording - Hitachi VTFX6500A Instruction Manual

INSERTING AND REMOVING CASSETTES

- 15 -
INSERTING AND REMOVING CASSETTES
A power source must be connected before inserting or removing cassettes. Once connected, cassettes
can be inserted or removed whether the CAM/OFF/VIDEO switch is on or off.
Inserting a cassette
1. Connect the POWER SOURCE. (See pages 9 and 10.)
2. Press "STOP/EJECT". The cassette door will open automatically.
3. Insert the cassette so the transparent window is toward you and the arrow toward the cassette holder. Slide
the cassette into cassette holder as far as it will go.
NOTE: Push in the center of the cassette all the way until it is latched by the cassette holder.
4. Press the cassette holder. The holder will latch in the operating position.
Removing a cassette
Press "STOP/EJECT". The cassette door will open automatically. Remove the cassette.

MAKING A SAMPLE CAMERA RECORDING

1. Connect the POWER SOURCE. (See pages 9 and 10.)
2. Insert the cassette.
3. Press and hold the small button on "CAM/ OFF/VIDEO", and then slide it to the "CAM" position. The
camcorder will enter record/pause mode automatically.