Disassembly For Repair - Kenwood TK-7160 Service Manual

INSTALLATION / DISASSEMBLY FOR REPAIR
2. External Speaker (Option)
2-1. KES-3
The KES-3 is an external speaker for the 3.5-mm-diameter
speaker jack.
■ Connection Procedure
1. Connect the KES-3 to the 3.5-mm-diameter speaker jack
on the rear of the transceiver.
2-2. KES-5
External speaker KES-5 can be installed for KAP-2. If KES-
5 is installed, it can be set by changing the CN1 short pin from
pins 4 and 5 to pins 5 and 6 on the KAP-2.
CN1 Connect
4-5 INT. SP or KES-3
5-6
■ Connection Procedure
Insert the crimp terminal into the Square plug supplied
with the KAP-2.
Black/White
4
lead
E59-0419-05
5
Black lead
F29-0481-05
Fig. 7
Set Up
KES-5
1. When you remove the panel, turn the transceiver up side
down. Detach the panel by lifting the tabs as shown be-
low.
Tabs
Fig. 1
2. To remove the cabinet, first turn the transceiver up side
down. Detach the cabinet by prying the tabs as shown
below.
Tabs
Fig. 2
3. When mounting the front panel, match the 4 tabs of the
chassis with the panel, being sure they attach securely.
Tabs
Fig. 3
TK-7160
Tabs
Tabs
11