Sagem MYX-2 User Manual page 38

My-X2 English.book Page 37 Lundi, 26. mai 2003 10:45 10
Sounds
Silent mode
Sounds
Back Select
Beeps
Sounds
Back Select
WARNING: vibrate mode is not a priority in relation to the choice of ring
tones in the call groups. To make vibrate mode apply in general, switch
to Silent mode.
This menu allows you to switch to Silent mode.
From the Sounds menu select Silent mode and Select.
Activate or deactivate Silent mode and accept.
Silent mode can also be accessed via the home page by holding down
the key.
When the device is in silent mode, the relevant icon appears on the
home page.
In this mode the ring tone will not function, except for the alarm clock..
This menu allows you to activate a beep for each type of event.
From the Sounds menu choose the Beeps menu and Select.
Select the type of beep you want to allocate from the choices offered (Key
beep, Network beep or Battery beep) and accept.
Activate or deactivate the beep and accept.
In the case of key beeps, you can also choose from the two types of
beeps offered: key beeps or Dtmf tone (different beep depending on the
key pressed).
37