Installing The Sim Card And Installing The Battery - Sagem MYX-2 User Manual

My-X2 English.book Page 11 Lundi, 26. mai 2003 10:45 10
Activating your phone

Installing the SIM card and installing the battery

1
2
3
4
5
The SIM card is inserted under the phone's battery. Ensure
that the phone is switched off and the charger disconnected.
1
Turn phone over and remove rear cover by lifting bottom end
first.
2 Take out battery if already installed.
3
Slide card fully under retaining plate with gold-plated contacts
facing phone and bevelled corner pointing as shown on
drawing of phone.
4
Insert battery into position by first positioning top section with
connectors.
5
Replace cover by engaging top hook first, then push down
back of rear cover.
11