Huawei HG658 User Manual page 25

Home gateway
Hide thumbs Also See for HG658:
Table of Contents

Advertisement

WPA2-PSK, or WPA-PSK/WPA2-PSK, and SSID is set to SSID1.
Note that the WPS function is forcibly disabled if the wireless
network uses the Wired Equivalent Privacy (WEP) encryption.
Step 4
Check the positions of the HG658 and the computer. Ensure that
they are far from the electric appliances such as microwave ovens,
refrigerators, or cordless telephones that generate strong magnetic
or electric fields.
Step 5
Place the HG658 in an open area.
Although radio signals can pass through obstacles, their
transmission is affected if they pass through too many obstacles
such as walls.
What can I do if noises exist during telephone calls?
Step 1 Check that a splitter is installed.
A splitter helps to protect the ADSL call quality from being affected
due to the interference of other signals.
Step 2 Check that telephone lines are securely connected. In particular,
ensure that the telephone line connecting to the splitter is securely
connected.
Step 3 Replace telephone lines and ensure that the telephone lines are not
faulty.
After a broadband device is installed, does Internet access degrade call
quality or do telephone calls lower the Internet access rate?
No. The HG658 uses the frequency division multiplexing (FDM) and splitter
technologies to separate voice signals from data signals. Although these two
types of signals are transmitted through one telephone line, they are carried
by different frequency bands. Therefore, they do not interfere with each
other. In this case, you can make telephone calls and access the Internet at
the same time, without degrading call quality or lowering the Internet access
rate.
20

Advertisement

Table of Contents
loading

Table of Contents