Troubleshooting - Sagem MY215X User Manual

Table of Contents

Advertisement

Troubleshooting

The phone won't start and/or won't take a charge
The battery has completely lost its charge.
Connect the phone to the charger for between 5 and 30 minutes. The
phone will only switch on after it has been charging for a few minutes.
You may use the phone again when the Start option is displayed on the screen.
If the phone still won't start after 30 minutes' charging, contact
customer service.
SIM not present
Check if the SIM card is present and properly positioned / inserted.
Check the condition of the SIM card. If damaged, please go back to
the operator's shop for advice. Contact your after-sales service if the
message persists.
Incorrect PIN code
An incorrect PIN code has been entered. Be careful! Three incorrect
PIN codes will block the SIM Card.
SIM BLOCKED
If a wrong PIN number is entered three times in succession, your
SIM card is blocked. You must then:
-
Enter the PUK (Personal Unblocking Key) code provided by your
operator, and validate.
-
Enter your PIN number and validate.
-
Enter your PIN number again and validate.
After 5 or 10 failed attempts (depending on the type of SIM card), the
SIM card is definitely locked. You must then contact your operator to
obtain a new card.
SIM LOCKED
In certain cases, the handset can only be used with some types of
SIM cards. This message means that the SIM card you are using
does not fit with the phone. Take the SIM card out, and switch it back
on. If the message SIM not present appears on the screen, you will
need to check its compatibility next to the place where you bought it.
If not, please contact your after-sales service.
Troubleshooting
57

Advertisement

Table of Contents
loading

Table of Contents