Configuring The Wireless Network Connection - Huawei HG655b Quick Start Manual

If the embedded dial-up function of the HG655b is enabled, you need to power off
the HG655b when you do not want to access the Internet. Otherwise, the ISP may
calculate the fee for accessing the Internet even if you have powered off your
computer.
Using the PPP Dial-Up Software of the Computer to Get
Online
Step 1 Configure the HG655b to work in the bridge mode
For details, refer to the procedure for enabling the embedded dial-up function described
in Step 2 in section "Using the Embedded PPP Dial-Up Software of the HG655b to Get
Online." The only difference is to select the Bridge mode not the Routing mode from
the Connection mode drop-down combo box.
Step 2 Configure your computer
The PPP dial-up software is installed in your computer, and then you can get online.
The Windows XP (Professional) operating system has an embedded PPPoE dial-up
software. To set up the dial-up connection in Windows XP system, do as follows:
1. Choose Start > All Programs > Accessories > Communications >
Network Connections.
2. Click Create a new connection in the displayed page.
3. Click Next in the New Connection Wizard dialog box.
4. Select Connect to the Internet and click Next.
5. Select Set up my connection manually and click Next.
6. Select Connect using a broadband connection that requires a user
name and password and click Next.
7. Enter the name of the dial-up connection (you can enter the name as you
like). Then click Next.
8. Select Anyone's use or My use only and click Next.
9. Enter the user name and password. Then click Next.
10. Click Finish.
4 Configuring the Wireless Network
Connection
If a wireless network adapter is installed on your computer, you can connect your
computer to the HG655b through a wireless connection.
9