Installing The Sim Card And The Battery - Sagem MY411V User Manual

Table of Contents

Advertisement

Installing the SIM card and the battery

WARNING
Depending on the model, network configuration and associated subscription cards, certain functions may not be available.
Your phone is identified by its IMEI number. Write this number down, and do not keep it with your phone, because you may
be asked for it in the event of your phone being stolen, in order to prevent it from being used, even with a different SIM card.
In order to display the IMEI on your phone's screen, type: *#06#.
Ensure that the phone is switched off and the charger disconnected.
1
Open the back cover using the notch located at the bottom of the phone. Take out battery if already installed.
2
Slide the SIM card into the card holder with fold face down and cut corner as shown in the figure below.
3
Place the battery by positioning first the top of it, as shown on the battery.
4
Place the back cover, clicking in first the upper part then the lower part.
1
Description
2
3
4
9

Advertisement

Table of Contents
loading

Table of Contents