Sagem MY421Z User Manual page 48

287244723_my421Z_EN.book Page 48 Monday, October 6, 2008 4:15 PM
- Delete all: This is used to delete all your devices. WARNING:
using this function needs starting the pairing over again.
- Activate: This is used to activate the connection with the device.
- Deactivate: This is used to deactivate the connection with the
device.
- Properties: This is used to display the list of the device's
®
Bluetooth services.
Notes:
- Refer to the user manual of the device with which you are pairing
to find out how to set this device to the mode allowing this
operation.
- The code of the remote device may be predefined by the device
manufacturer. In this case, refer to the user manual of this device
to find out this code.
®
Bluetooth name
- This is the name used to identify your phone when it is detected
®
by another Bluetooth
USB Mode
This menu allows you to select a mode to connect the phone to a
PC with a USB cable available as an accessory.
At Plugging-in
If you select this option, when connecting a USB cable, the phone
asks you to select the mode you want.
Modem
This mode is a communication mode between the phone and a PC.
It allows you to exchange data (visit cards, contacts) between the
phone and a PC.
After connection of the USB cable between the phone and the PC,
you must use the MPAS software (My Pictures And Sounds
available on www.planetsagem.com) or the Wellphone software
(available on www.wellphone.com).
PictBridge
This mode allows you to connect the phone to a printer (printing
photos) without using a PC.
48
device.
Settings