Sagem MY421Z User Manual page 47

287244723_my421Z_EN.book Page 47 Monday, October 6, 2008 4:15 PM
- On & visible: Your phone is visible for a period of 3 minutes.
During this period, it can be detected by the other Bluetooth
devices. Select this mode when a pairing with your phone has
been initiated from another Bluetooth
- On & always: Your phone is visible and can be detected by the
®
other Bluetooth devices as long as this mode is selected.
®
- Off: The Bluetooth function is not available.
IMPORTANT:
- The Off option ensures the best battery life for your phone.
®
- Bluetooth security is better guarded because your phone
remains invisible to the other devices.
Paired devices
This menu lets you draw up the list of devices with which the
®
Bluetooth connection is secure (by authentication and encryption).
A device must be added to this list before it can be used in
®
Bluetooth with your phone except for exchanging objects. When
you select send by Bluetooth
etc.) the phone displays the list of devices. You do not need to
select a device from this list at this time, you can start a one-off
search for a device when you initiate sending.
See below for the pairing procedure.
Pairing procedure
Select Paired devices/New Device.
®
If the Bluetooth function is not active, the phone prompts you to
activate it using one of the 3 modes described above.
The phone searches for visible Bluetooth
list. Select the device concerned and validate your choice. Your
phone then prompts you to enter a code which must be the same as
the code entered on the remote device. Enter and validate this
code: Your phone is now paired with the remote device.
A connected device is shown in bold in the list.
[Options] on the name of a device lets you access the following
options:
- Delete: This is used to delete the device. WARNING: using this
function needs starting the pairing over again.
- Rename: This is used to modify the name of the device.
Settings
®
device.
®
(photo, Todo task, contact details,
®
devices and displays the
®
47