Table of Contents
Advertisement
Blacklist
The blacklist is used to limit failures on automatic calls (calls
generated by the automatic redial function or by
applications: data, fax for example).
When several automatic calls failed with a number (number
busy or unknown), this number is put in the blacklist and no
automatic call will be done with this number any more until
you delete it from the blacklist.
Note: this function does not apply to the calls performed
manually.
Voicemail
This function is used to record your voicemail access
number.
This number will be used during a call to the voice mailbox
using the programmable keys.
New number
After an incoming or outgoing call with a number not stored
in the phonebook, this option allows you to activate or
deactivate a request to store the number in the phonebook.
Networks
This menu allows you to configure network preferences.
Choose Selection to activate (automatically or manually)
one of the networks accessible in the area in which your are
located.
Choose Preferred to view all the pre-registered networks.
Choose Network type to select your network: GSM-DCS or
PCS (depending on model).
Choose GPRS to select the way you want to be attached on
the GPRS network: always, or only when needed (when
launching a data connection).
28
Security
This menu allows you to configure your phone's security
settings.
PIN number
This menu allows you to activate and modify your phone's
PIN.
To modify the PIN, select Modify PIN code and [Select].
Enter old PIN and validate.
Enter new PIN twice and validate.
To activate or deactivate the PIN, select the Control PIN
menu and [Select].
Enter PIN and validate.
Select Activate or Deactivate and validate.
PIN2 number
You have a second PIN number to allow you to access
certain functions.
These functions may or may not be available depending on
your SIM card.
Proceed as above in order to activate, deactivate or modify
PIN number 2 of your phone.
Phone code
The Phone code menu allows you to activate the phone
code so that it is requested and checked whenever the
phone is switched on if a different SIM card is used. This
code is automatically linked to the SIM card installed when
the phone is activated, for example to protect the phone if
stolen.
Select Check and [Select].
Enter 0000 (the factory code, by default) and validate.
Select Activate or Deactivate and validate.
To modify the phone code, select Modify and validate.
Advertisement
Table of Contents
