Table of Contents
Advertisement
WAP
Configuring WAP parameters
Advanced...: choose one of the following advanced settings
- Settings
- Show URL
- Disconnect
- Circuit prompt (if user wants to confirm each logon)
- Security (is used to access information on making WAP connections
secure)
- Delete Cookies
About...: information on the browser.
Exit: returns to the phone's home page.
Select the Advanced... menu, then the Settings menu.
Choose from the proposed sub-menus:
Connection settings is used to select or modify your access provider's
logon parameters or configure the parameters of other access providers.
The active access service is preceded with a star.
Configuration of WAP and GPRS parameters:
All information to be entered in the parameters are provided by your
operator or access provider.
Choose the access service, then press Options.
Enter the title and validate.
Enter Internet address of home page and validate.
Enter parameters of preferred connections:
- GSM if not GPRS (by default): the logon to WAP services uses the
GPRS as a priority. However, in the event of unavailability of the
GPRS network, the GSM network is used to establish the link.
- GPRS: the logon to WAP services uses the GPRS network
exclusively.
- GSM: the logon to WAP services uses the GSM network exclusively.
43
Advertisement
Table of Contents
