Configuring Wap Parameters - Sagem MYC5-2V User Manual

252210940_myC5-2v_en.book Page 23 Vendredi, 23. septembre 2005 2:36 14
About...: information on the browser.
Exit: returns to the phone's home page.

Configuring WAP parameters

Select the Advanced... menu, then the Settings menu.
Profiles is used to select or modify your access provider's logon parameters or configure the parameters of other access
providers.
The active profile is preceded with a star.
The Menu is used to add a new profile or to display the memory size available.
Configuration of GSM and GPRS parameters:
All information to be entered in the parameters are provided by your operator or access provider.
On a profile in the list, press [Options], select Modify. The different parameters are: Provider title, Home page, Preferred
connections (see next page), GSM parameters and GPRS parameters (see next page).
Preferred connections:
- GSM if not GPRS (by default): the logon to WAP services uses the GPRS as a priority. However, in the event of
unavailability of the GPRS network, the GSM network is used to establish the link.
- GPRS: the logon to WAP services uses the GPRS network exclusively.
- GSM: the logon to WAP services uses the GSM network exclusively.
GSM parameters:
- Login
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- Dial-up number
- Mode (digital, analog or automatic)
GPRS parameters:
- Login
- Password
- IP address of WAP gateway
- Port type (secure or insecure)
- APN: if no APN has been defined, press [Options] then the APN menu. Select or add an APN.
Once all the settings have been entered, you can activate the chosen access provider. Select him from the list. Validate your
choice.
Linger timer is used to choose the time after which the call is automatically disconnected if you have forgotten to log off from
a service.
WAP
23