Table of Contents
Advertisement
Settings
Active flip
Connectivity
Serial Speed
On the Settings menu, please select Active flip and [Select].
By default, calls are answered by opening the flip and you will just need
to close it to hang up. That facility can be deactivated.
This menu allows you to modify these settings:
- On opening: this menu enables you to activate or not the option of
taking the call by opening the flip.
- On closing: this menu enables you to activate or not the option of
hanging up by closing the flip.
You can also connect it to your computer in order to receive data or fax
through GSM or GPRS network (depending on subscription): configure the
connection parameters of your computer using the Wellphone CD supplied
as an accessory.
On the Connectivity menu, please select the Serial Speed parameters
menu and [Select].
The Speed menu enables you to select the speed to be used for data
exchanges via your phone's serial port. Except for specific
requirements, it is advisable to stick to the default setting: Automatic.
67
Advertisement
Table of Contents
