Table of Contents
Advertisement
VIDEOCASSETTE PLAYER/RECORDER
VDH9600
Using Manual Tracking
Using the Remote Control, you can adjust the picture tracking
manually (see Figure 8).
• Automatic tracking is initiated when you first insert a
videocassette in the CASSETTE Compartment.
• Manual tracking may be used when auto tracking does not
fully correct picture tracking noise. Press TRACKING +
(or –) to increase (or decrease) manual tracking.
Figure 8. Auto and Manual Tracking functions are located on the
Remote Control.
12
NOTE: If you reach the limit on either TRACKING + or – and
notice no further improvement, the tape may be severely worn
or the unit's heads may need cleaning (also see
Troubleshooting on page 16).
O
T
VDH9600
PERATING
HE
Loading And Playing A Videocassette
1. Gently insert a videocassette (with the labeled side up)
into the CASSETTE compartment, as shown in Figure 9.
The unit will automatically power on, load the tape, and
automatically adjust tracking error, and sense if the tape is
HI-FI.
Figure 9. Loading a videocassette into the VDH9600.
Advertisement
Table of Contents
