Stabiliser, Zoom and Flash
•
The Optical Image Stabiliser may produce operational sound or cause vibration during
its operation, but these are not malfunctions.
•
When a tripod is used, we recommended that [Operation Mode] be set to [OFF].
•
We recommend taking pictures with the viewfinder when panning in [
•
The Optical Image Stabiliser operates only while a picture is being recorded.
•
The longer the focal length is, the weaker the effect of the Optical Image Stabiliser will be.
Not available in these cases:
•
When [Panorama Shot] in Scene Guide Mode is set, [
cannot be used.
•
Optical Image Stabiliser is not available in the following cases.
–
When the shutter speed is set to [B] (Bulb)
–
When the shutter speed exceeds 2 seconds
–
When [Burst Rate] is set to [SH]
–
When recording motion pictures
–
Recording still pictures while recording a motion picture [only when set to [
picture priorities)].
•
The stabiliser function may not be effective in the following cases. Be careful of camera jitter
when you press the shutter button.
–
When there is a lot of jitter.
–
When the zoom magnification is high.
–
When using the Digital Zoom.
–
When taking pictures while following a moving subject.
–
When the shutter speed becomes slower to take pictures indoors or in dark places.
•
The panning effect in [
–
In brightly lit places such as in broad daylight on a summer's day.
–
When the shutter speed is faster than 1/100th of a second.
–
When you move the camera too slowly because the subject is moving slowly. (The
background will not become a blur.)
–
When the camera does not keep up with the subject satisfactorily.
] is more difficult to achieve in the following cases.
208
].
] of the Optical Image Stabiliser
] (motion