Focus and Exposure Settings
Setting the duration for which the screen is enlarged
[MENU] > [Custom]>[Pinpoint AF Time]>
[LONG] (Approx. 1.5 seconds)/[MID] (Approx. 1.0 second)/[SHORT]
(Approx. 0.5 second)
Moving/not moving the AF area with the cursor button
[MENU] > [Custom]>[Direct Focus Area]>[ON]/[OFF]
When [š], [
], or [Ø] is selected, the AF area can be moved; when [
the enlarged position can be moved.
•
To set the items that use the cursor buttons like [Drive Mode], [White Balance], or
[Sensitivity], use the Quick Menu
•
The spot metering target can also be moved to match the AF area when the [Metering Mode]
(P168)
is set to [
around the AF area.
•
When [Touch AF] is set to [AF+AE], the brightness optimisation position follows the movement
of the AF area. (The AF area works as [Ø].)
Not available in these cases:
•
[Direct Focus Area] is fixed to [OFF] in the following case.
–
Creative Control Mode
•
When using digital zoom, the position and size of the AF area cannot be changed.
(P43)
]. At the edge of the screen, the metering may be affected by the brightness
instead.
(P172)
155
] is selected,