AV Interface
You can set up audio and visual (AV) interface parameters.
Displaying the AV I/F 1 Screen
AV I/F 1 screen
3
2
4
5
1
1 Returns to the Control screen of the previous
source.
2 Calls the Sound Effects Menu. (page 58)
3 Returns to the Setup Menu.
4 Selects a navigation system connection. (
"RGB":
"AV-IN": Allows a third-party navigation system to
4
5
"Off":
6
7
5 Sets a name to be displayed when you select a
system that is connected via the AV INPUT port.
(
VIDEO)
• If you have set the navigation system connection to "AV-IN",
the display is fixed to "NAV".
6 Sets an image display of the system that is
connected via the AV INPUT port. (
"Off":
"On":
7 Displays the AV I/F 2 screen.
• If
or
Allows the Kenwood's Navigation System
to connect via its interface cable.
connect via the AV INPUT port.
Must be used if no navigation system
is connected. (The navigation display
is cancelled when the AV source is
switched.)
When the image source is switched, an
image entered via the AV INPUT port is
displayed.
When an image signal is entered via the
AV INPUT port, this image is displayed.
is not shown, touch
to display it.
Setup Menu
RGB)
Off)
47
|
English