Panel Description - Icom IC-F50V Instruction Manual

COMPANDER KEY
Push to turn the compander function ON and OFF.
The compander function reduces noise components from the
transmitting audio to provide clearer communication.
USER SET MODE KEY
➥ Push and hold to enter the User Set mode.
• In the User Set mode, push this key to select an item that is ena-
bled by your dealer, and change the value or condition by pushing
[CH Up] or [CH Down].
➥ Push and hold this key again to exit the User Set mode.
PLAYBACK KEY (p. 22)
➥ Push to playback the recorded messages in sequence, starting
with the latest one.
• A short beep is emitted after playing back each message.
• A long beep is emitted after playing back all messages.
• An error beep is emitted when there are no messages in the
memory.
➥ While playing back the message, push and hold for 1 sec. to
delete the selected message.
PLAYBACK/REC KEY (pp. 21, 22)
➥ Push to playback the recorded messages in sequence, starting
with the latest one.
• A short beep is emitted after playing back each message.
• A long beep is emitted after playing back all messages.
• "NO REC" is displayed when no message is in the memory.
➥ Push and hold for 1 sec. to start recording. Push again to stop
recording.
➥ While playing back the message, push and hold for 1 sec. to
delete the selected message.

PANEL DESCRIPTION

2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
12