Foxconn 915M03 Series Manual page 30

IrDA Header: IR
This connector supports wireless transmitting and receiving device. Before using
this function, configure the settings of IR Mode from the " Integrated Peripherals"
section of the CMOS Setup.
Fan Connectors:CPU_FAN, FAN1
The fan speed of CPU_FAN and FAN1 can be detected and viewed in " PC Health
Status" section of the CMOS Setup. These fans will be automatically turned off
after the system enters S3, S4 and S5 mode.
22
Chapter 2
915M03 Series User Manual
Installation Instructions
TX
GND
RX
Empty
+5V
1
IR
CONTROL
SENSE
POWER
GROUND
1
GROUND SENSE
FAN1
1
POWER CONTROL
CPU_FAN