Foxconn 915M03 Series Manual page 14

Table of Contents

Advertisement

ATX 12V connector
1
This power connector connects the 4-pin 12V plug from the ATX 12V power
supply.
2
CPU socket
LGA 775 Socket T is for the Intel
North Bridge controller
3
®
Intel
915G/P/GV supports FSB 800/533 MHz, DDR2 533/400 MHz, PCI Express
x16 (only for 915G/P). Intel
accelerator.
4
DDR DIMM solts
These four 240-pin DIMM slots support up to 4 GB system memory using
unbuffered non-ECC DDR2 533/400 DIMMs.
ATX power connector
5
This 24-pin connector connects to an ATX power supply. The power supply
must have at least 1A on the +5V standby lead (+5VSB).
Floppy disk connector
6
This connector accommodates the provided ribbon cable for the floppy disk
drive. One side of the connector is slotted to prevent incorrect insertion of the
floppy disk cable.
7
IDE connector
The IDE connector supports Ultra DMA 100/66, PIO Modes 3 & 4 IDE device.
The connector is slotted to prevent incorrect insertion of the IDE ribbon cable.
8
Flash ROM
This 4Mb flash ROM contains the programmable BIOS program.
6
Chapter 1
®
Prescott-T processor.
®
915G/GV provides an integrated graphics
915M03 User Manual
Product Introduction

Advertisement

Table of Contents
loading

Table of Contents