Table of Contents
Advertisement
18
Operating
Deleting an MP3/WMA/FLAC
file
You can delete file, folder or format by pressing
DELETE on the remote control. This function is
supported only in stop state. (USB only)
1. - Select the file you want to delete by using
Y/U . And press DELETE.
- Select the folder you want to delete by
2
pressing PRESET/FOLDER W/S. Then press
DELETE.
- Press and hold DELETE to format the USB
device.
Press DELETE repeatedly while searching a file.
The display window will be changed in the
following order.
- DEL FILE : Deletes file
- DEL DIR? : Deletes folder
- FORMAT? : Formats USB
2. To delete file/folder or format, press T .
3. If you want to exit the current mode, press
I ENTER.
>
Caution
y Do not extract the USB device during
operation. (play, delete, etc.)
y Regular back up is recommended to
prevent data loss.
y The delete function may not be supported
according to the USB state. (lock, etc.)
CM3330W-FK_DAUSLLK_ENG.indd 18
Or
Displaying file information
While playing an MP3/FLAC file containing file
information, you can display the information by
pressing INFO on the remote control.
Turn off the sound temporarily
Press @MUTE on the remote control to mute
your sound.
You can mute the sound in order, for example, to
answer the telephone. And "MUTE" will appear in
the display window. To cancel mute function, press
@MUTE again or adjust volume level by pressing
VOL+/-.
Sleep Timer Setting
Press SLEEP on the remote control repeatedly to
select delay time between 10 and 180 minutes.
After delay time, the unit will turn off. (You can see
the following order, 180 -> 150 ->120 -> 90 -> 80 ->
70 -> 60 -> 50 -> 40 -> 30 -> 20 -> 10)
To cancel the sleep function, press SLEEP
repeatedly until the display window get bright.
,
Note
y Press SLEEP. The remaining time appears in
the display window.
y If Sleep function is set the front display will
dim.
Dimmer
Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until the display window get bright.
Auto Power Down
This unit will be off itself to save electronic
consumption in the case main unit is not
connected to external device and is not used for 25
minutes. So does this unit after 6 hours since Main
unit has been connected to other device using
analog input.
2013-02-27
11:18:00
Advertisement
Table of Contents
