Setting Up The Tv With Your Pc - Samsung LA40M86BD Owner's Instructions Manual

Setting up the tV with your PC

adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning
alone, then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced,
re-adjust the picture so that it is aligned on the center of the screen.
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Picture", then press the EntEr/oK button.
Press the ▲ or ▼ button to select "Screen", then press the EntEr/oK button.
Change to the PC mode first.
2. Press the ▲ or ▼ button to select "Coarse" or "Fine", then press the EntEr/oK
button.
Press the ◄ or ► button to adjust the screen quality.
Vertical stripes may appear or the picture may be blurry.
Press the EntEr/oK button.
Press the ExIt button to exit.
Changing the Screen Position
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Picture", then press the EntEr/oK button.
Press the ▲ or ▼ button to select "Screen", then press the EntEr/oK button.
Change to the PC mode first.
2. Press the ▲ or ▼ button to select "Position", then press the EntEr/oK button.
3. Press the ▲ or ▼ button to adjust the V-Position.
Press the ◄ or ► button to adjust the H-Position.
Press the EntEr/oK button.
Press the ExIt button to exit.
Initializing the Image Settings (Image reset)
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Picture", then press the EntEr/oK button.
Press the ▲ or ▼ button to select "Screen", then press the EntEr/oK button.
Change to the PC mode first.
2. Press the ▲ or ▼ button to select "Image Reset", then press the EntEr/oK
button.
Press the ExIt button to exit.
adjusting the PC Screen automatically (auto adjustment)
Auto adjustment allows the PC screen of set to self-adjust to the incoming PC video signal. The values of fine, coarse and position
are adjusted automatically.
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Picture", then press the EntEr/oK button.
Press the ▲ or ▼ button to select "Auto Adjustment", then press the EntEr/oK
button.
2. Press the ExIt button to exit.
English - 55
Sharpness : 50
Auto Adjustment
Screen
Detailed Setting
Picture Options
Picture Reset
Screen
Coarse
Fine
Position
Image Reset
Move Enter
Screen
Coarse
Fine
Position
Image Reset
Move Enter
Position
Adjust Enter
Screen
Coarse
Fine
Position
Image Reset
Move Enter
Brightness : 45
Sharpness : 50
Auto Adjustment
Screen
Detailed Settings
Picture Options
Picture Reset
►
50
0
Return
50
0
►
Return
Return
50
0
►
Return
►