Channel Control; Memorizing The Channels - Samsung LA40M86BD Owner's Instructions Manual

Channel Control

memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available
channels are memorized, use the Ch
channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify
the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the EntEr/oK button.
2. Press the EntEr/oK button select "Antenna".
Press the ▲ or ▼ button to select "Air" or "Cable", then press the EntEr/oK
button.
Press the ExIt button to exit.
If the antenna is connected to ANT 1 IN (AIR),
select "Air" and if it is connected to ANT 2 IN
(CABLE), select "Cable".
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE)
are connected, select the antenna input you
want.
If the antenna input is not selected properly,
noise may appear on the screen.
or Ch button to scan through the channels. This eliminates the need to change
English - 
or
Press the antEnna button on the
remote control to select "AIr" or
"Cable".
antenna : Air
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Child Lock
antenna : Air
Air
Cable
Auto Store
Manual Store
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Child Lock
►
►