To Select The Source; To Edit The Input Source Name - Samsung LA40M86BD Owner's Instructions Manual

to Select the Source

Use to select TV or other external input sources such as DVD players or Cable Box/
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source
of your choice.
1. Press the mEnu button to display the menu.
Press the▲ or ▼ button to select "Input", then press the EntEr/oK button.
2. Press the EntEr/oK button to select "Source List".
Press the ▲ or ▼ button to select signal source, then press the EntEr/oK button.
You can choose between the following sets of jacks: AV1, Component1,
Component2, PC, HDMI1 or HDMI2/DTV on the TV's rear panel and AV2,
S-Video or HDMI3 on the TV's side panel.
HDMI1, HDMI2/DVI, HDMI3 input can only be selected when the external
device is turned on and connected via HDMI.
You can choose only those external devices that are connected to the TV.
using the Colour buttons on the remote with the Source list
• Red (Refresh): Refreshes the connecting external devices.
• (Option): Displays the Edit Name and Information menus.
toolS
Press the SourCE button on the remote control to view an external signal source.

to Edit the Input Source name

Name the device connected to the input jacks to make your input source selection easier.
1. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Input", then press the EntEr/oK button.
Press the ▲ or ▼ button to select "Edit Name", then press the EntEr/oK
button.
2. Press the ▲ or ▼ button to select "AV1", "AV2", "S-Video", "Component1",
"Component2", "PC", "HDMI1", "HDMI2/DVI" or "HDMI3" input jack, then press
the EntEr/oK button.
3. Press the ▲ or ▼ button to select "VCR", "DVD", "Cable STB", "Satellite STB",
"PVR STB", "AV Receiver", "Game", "Camcorder", "PC", "TV", "IPTV", "Blu-
Ray","HD DVD", "Digital Media Adapter" input source, then press the EntEr/oK
button.
Press the ExIt button to exit.
When a PC with a resolution of 1920 x 1080@60Hz is connected to the
HDMI IN 1 port, you should set the "HDMI1" mode to "PC" in the "Edit Name"
of the "Input" mode. If the "HDMI1" mode is not PC, it works depending on the
TV setting.
English - 48
Source list
Edit Name
tV
AV1 ----
AV2 ----
S-Video ----
Component1 ----
Component2 ----
PC ----
Refresh Option
toolS
Source List
Edit name
Edit Name
AV1 : ----
AV2 : ----
S-Video : ----
Component1 : ----
Component2 : ----
PC : ----
HDMI1 : ----
▼
Move Enter
Edit Name
AV1 : ----
----
AV2 : ----
VCR
S-Video : ----
DVD
Component1 : ----
Cable STB
Component2 : ----
Satellite STB
PC : ----
PVR STB
HDMI1 : ----
Move Enter
►
Return
Return