Connecting to an External Source
Connecting an External Analogue Component
Example: Analogue signal components such as a VCR.
1
Connect AUX IN(Audio) on the player to the Audio Out of the external
Analogue component.
2
Press the F(
) button to select AUX input.
You can select AUX by pressing the FUNCTION button on the
remote control.
POWER
POWER
CD REC
DISPLAY
SPEED
TIMER
TIMER/CLOCK
5V
500mA
AUX IN
PHONES
AUX IN
FUNCTION
FUNCTION
USB REC DISC SKIP
CD
SLEEP
Connecting the FM Aerial
How to connect a COAXIAL TYPE aerial.
Connect a antenna to the FM antenna terminal.
Plug the connector on the FM aerial supplied into the coaxial socket marked
FM on the rear of the system.
Follow the instructions given on Page 16 to tune into a radio station, and
determine the best position for the aerial.
If reception is poor, you may need to install an outdoor aerial.
To do so, connect an outdoor FM aerial to the FM socket on the rear of the
system using a coaxial cable (not supplied).
ONLY FOR
SERVICE
SPEAKERS
OUT 8
ONLY FOR
SERVICE
SPEAKERS
OUT 8
9
ENG