Checking Or Changing Programmed Cd Tracks; Playing Usb; To Use High Speed Search - Samsung MM-D330 User Manual

Checking or Changing Programmed CD
Tracks
ENG
You can check or change your selection of tracks at any time.
1
Press once if you have started listening to the selection.
2
Press ENTER(
Result: The following indications are displayed:
(C = Check, 01=Program No., -- -- = Track No. on the disc)
If you have already programmed 24 tracks, C is displayed
instead of P when you press ENTER(
3
Press ENTER( ) once or more times until the track to be changed is
displayed.
4
Press or button to select a different track.
5
Press ENTER(
6
Press PLAY ( ) to start listening to the selection.
Result: The first track selected is played.
RDS PTY
SOUND
VOL

Playing USB

You can play MP3/WMA files by connecting to various external USB
storage devices such as USB flash memory or HDD(Hard Disc drives).
1
Connect the external USB storage device to your player.
2
Select USB function by pressing the FUNCTION button.
The first track of the first directory plays automatically.
To stop playing
Press the Stop (
To remove the USB device
Press the Stop (
device safely.
Do not connect a USB charging device to the USB connection port
on the player, because it may cause damage to the product.
14
) twice .
) .
) to confirm your change.
DELETE RDS DISPLAY
MP3-CD/CD
EQ
TUNING /ALBUM
VOL
) button to stop playing.
) button again,you can remove the USB
Please be aware of the following before using USB.
Some external USB storage device may not be compatible with this
player.
With external HDD, FAT format can be played.
With USB 2.0 HDD, connect to a separate power source.
If it's not connected to a separate power source, it may not work.
If memory of an external USB storage device is segmented into
several parts, MP3 files of only the first hard disk drive can be
played.
DRM applied files are not played.
Digital Rights Management: Technology and service that protect the
profit and rights of copyright owners by disallowing unauthorized use of
digital contents.
Even if the file name ends with .mp3, the file does not play if actual file
format is MPEG layer 1 or 2.
Do not use a USB hub as it will not be recognized.
Up to 15 letters of MP3/WMA file name will be shown.
Removable HDDs equipped with less than 160 Gbytes are supported.
Removable HDDs equipped with 160Gbytes or more may not be
recognized, depending on the device.
Delay
When selecting USB function,file reading (READ-IN) may take several
minutes.
When playing a USB device,there may be a delay then advancing to the
next track,especially with HDD.
The operation time of external USB storage devices will vary;even when
they are of the same capacity.
If the external USB storage device supports only USB VER1.1
and the access speed is slow,the file may not property.
POWER
CD REC
DISPLAY
SPEED
MP3-CD/CD
SOUND
TUNING /ALBUM

To use high speed search

Before you begin! Connect the external USB storage device to your player.
Select the USB function by using the FUNCTION button.
You can search the desired section quickly during the play
Press the , button.
Whenever you press the button, you can search backward or
forward quickly.
When you use the high speed search function, there is no sound.
MP3-CD/CD
SOUND
TUNING /ALBUM
5V
5V
500mA
500mA
AUX IN PHONES
FUNCTION FUNCTION
USB REC DISC SKIP
EQ
EQ