Wiring Example And How To Set The Remote Controller - Daikin FXFQ09PVJU Installation Manual

8-2 Electrical characteristics
Units
Model Hz
FXFQ09PVJU
FXFQ12PVJU
FXFQ18PVJU
FXFQ24PVJU 60
FXFQ30PVJU
FXFQ36PVJU
FXFQ48PVJU
MCA: Min. Circuit Amps (A)
kW: Fan Motor Rated Output (kW)
8-3 Specifications for field supplied fuses and wire
Power supply wiring
Field fuses
15A
Allowable length of transmission wirings and remote controller wiring are as follows.
(1) Outdoor unit - Indoor unit:
Max. 3280ft. (Total wiring length: 6560ft.)
(2) Indoor unit - Remote controller
Max. 1640ft.
NOTE
1. Vinyl cord with sheath or cable (Insulated thickness : 0.04in. or more)

9. WIRING EXAMPLE AND HOW TO SET THE REMOTE CONTROLLER

9-1 How to connect wirings
Connection of wiring between units, ground wire and for the remote controller cord (Refer to Fig. 25)
• Wiring the units and ground wire
Remove the control box lid and connect wires of matching number to the terminal block for wiring the units
(3 P) inside. And connect the ground wire to the ground terminal. In doing this, pull the wires inside through
the hole and fix the wires securely with the included clamp (4) (2 points).
• Remote controller cords (not neccessary for slave unit of simultaneous operation system)
Remove the control box lid and pull the wires inside through the hole and connect to the terminal block for
remote controller (6 P). (no polarity) Securely fix the remote controller cord with the included clamp (4) (2
points).
• After connection, attach sealing pad (13).
• Be sure to attach it to prevent the infiltration of water from the outside.
English
Volts Voltage range
Max. 253
208/230
Min. 187
MOP: Maximum Overcurrent Protective Device (A)
FLA: Full Load Amps (A)
Size
Wire size must comply with
local codes.
Power supply
MCA MOP
0.3 15
0.3 15
0.4 15
0.5 15
0.6 15
1.4 15
1.5 15
Remote controller wiring
Transmission wiring
Wire
Sheathed wire
(2 wire)
Fan motor
kW FLA
0.056 0.2
0.056 0.2
0.056 0.3
0.056 0.4
0.056 0.5
0.120 1.1
0.120 1.2
Size
AWG18 - 16
17