Troubleshooting - Samsung VACUUM CLEANER Operating Instructions Manual

USAGE OF FLOOR NOZZLE
FOR RUG / FLOOR SELECTOR
Before use make sure that the position of the selector is in the right position for the type of surface to be
cleaned.
Select the carpet indicator ➀ when cleaning carpets.
Select flat surface indicator ➁ when cleaning the floors, tiles, etc.
FOR UNIVERSAL BRUSH
Use the floor nozzle for cleaning all surfaces.
NOTE:
For optimum efficiency, clean floor brush with crevice tool.
TROUBLE SHOOTING
PROBLEM
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind fully.
This Vacuum cleaner is approved the following
EMC Directive : 89/336/EEC, 92/31EEC and 93/68/EEC
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC
If you have any comments or questions regarding a Samsung products,
contact the SAMSUNG customer care center.
Country
U.K
SOUTH AFRICA
CAUSE
No power supply.
Filter, nozzle, suction hose
or tube is blocked.
Check that the cord is not
twisted or wound unevenly.
Customer Care Center
0870 242 0303
0860 7267864 (SAMSUNG)
Check cable, plug and
socket.
Remove the object.
Pull the cord out 2~3m &
push down the cord rewind
button.
☎
Web Site
www.samsung.com/uk
www.samsung.com/za
REMEDY
DJ68-00094E REV(0.2)