Replacing The Microfilter; Troubleshooting - Samsung VAC9013BP Operating Instructions Manual

DJ68-40015J 2001.9.159:34AM I °| 4] 11 D
The motor filter protects the motor from dirt and ensures long-lasting and efficient operation,
When the filter becomes dirty, wash it in warm water, dry it thoroughly, and position it in place.
r MOTOR FILTER
REPLACING THE MICROFILTER
'The microfilter filters the air which comes out from the vacuum cleaner.
"lo open the filter cover, press down and pull it simultaneously.
*Remove and replace the dirty microfilter,
+ Close the cover | |
MICROFILTER
TROUBLESHOOTING
PROBLEM _
Check cable, plug and
Filter, nozzle, suction Remove the
hose tube blocked, or [obstruction or replace
bag full. bag.
| Suction force is
gradually reduced
Check that the cord is|Pull the cord out
not twisted or wound |6~10f & push down
unevenly the cord rewind button.
(GB 10
| Cord does not rewind
fully
LD gi