Connecting To The Water Supply Line - Samsung Refrigerator User Manual

Hide thumbs Also See for Refrigerator:

User manual (180 pages)

Owner's manual (40 pages)

Owner's manual and installation (32 pages)

Table Of Contents

Table of Contents

Enlarged version

Close Main

Water pipe

NO GAP

Close Main

Water pipe

4. After connecting the water supply to the water

ﬁ lter, turn your main water supply back on and

dispense about 1l to clear and prime the water

ﬁ lter.

Connecting the water line to the

refrigerator

1. Remove the dust cap from the water line on the

rear of the unit and ﬁ t a compression nut from the

install kit.

2. Remove the water pipe from the install kit and ﬁ t a

compression nut to one end.

3. Join the two pipes together using the compression

joint from the install kit ensuring that the joint is

water tight.

4. Join the other end of the install pipe to the main

water supply and turn on the water to check for

leaks.

Remove

Loosen a

cap

Water Line

from unit

Water Line

from Kit

Only connect the water line to a drinkable water

source.

If you have to repair or disassemble the water

line, cut off 6.5mm of the plastic tubing to

make sure you get a snug, leak-free connection.

Before being used, the leakage in

these places should be examined

CAUTION

• Samsung Warranty does not cover WATER LINE

• The cost of connection to a water supply is at the

• Please contact Plumber or Authorised Installer for

• If Water leakage occurs due to improper

INSTALLING THE WATER

DISPENSER LINE

For Exterior model

Parts for water line Installation

No gap