Connecting To The Water Supply Line - Samsung RS-21 KLMR User Manual

• Samsung Warranty does not cover WATER LINE
INSTALLATION.
• The cost of connection to a water supply is at the
customer expense, unless included in the delivery
charge (refer to the delivery agreement with the
seller)
• Please contact Plumber or Authorised Installer for
the installation if needed.
• If Water leakage occurs due to improper
installation, Please contact installer.
12_ setting up
Downloaded from Fridge-Manual.com Manuals
DA99-02028F(0.5).indb 12 DA99-02028F(0.5).indb 12
INSTALLING THE WATER
DISPENSER LINE
For Exterior model
Parts for water line Installation
Water line fi xer and screws Water line fi xer and screws
Water line Water line
Purifi er lock-clip Purifi er lock-clip

Connecting to the water supply line

Connect the water pipe with coupler and tap.
1. Close the main water tap.
2. Connect coupler "A" to the tap.
CAUTION
The water line must be connected to the cold water
pipe. If it is connected to the hot water pipe, it may
cause the purifi er to malfunction.
WARRANTY INFORMATION
This water line installation is not covered by the
refrigerator or ice maker manufacturer's warranty.
Follow these instructions carefully to minimise the risk of
expensive water damage.
Note:
If the coupler does not fi t on the current tap, go the
nearest authorised service dealer and purchase the right
couplers fi ttings.
Select the location where the purifi er
is to install. (Model with the purifi er)
- If you wish to reassemble the water inlet
and outlet sides of the purifi er during purifi er
installation, see the reference illustration.
- Cut the water line attached to the purifi er to the
appropriate place after measuring the distance
between the purifi er and the cold water tap.
Pipe connector Pipe connector
Purifi er Purifi er
2012.2.14 2:24:2 PM 2012.2.14 2:24:2 PM