Jensen VM9414 Operating Instructions Manual page 24

VM9414
Setting
TFT Open Off
Auto
Manual
Version View radio software version information.
Video Sub-menu Features
If the rear-view video camera is connected, the unit is on, and the TFT monitor
is retracted inside the unit, the TFT monitor automatically moves into the
viewing position and Camera mode is selected upon shifting into REVERSE
gear. When shifting into DRIVE gear, the TFT monitor is retracted back inside
unit.
Setting Options
TV Shape 16:9
4:3
Aux IN Auto
PAL
NTSC
Brightness 10 to (-10)
If the monitor is in display mode, the monitor automatically switches to
CAMERA mode upon reverse driving. When the reverse driving stops, the
monitor return to its original input mode.
Audio Sub-menu Features
Setting Options
Bass Freq 60Hz
80Hz
100Hz
120Hz
Middle 500Hz
Freq
1kHz
1.5kHz
2.5kHz
Options
You must press the OPEN button (1) to open the TFT
panel.
The TFT panel automatically opens when the unit is
turned on.
When the ignition is turned OFF, the TFT panel DOES
NOT retract if it was previously out.
The color signal output is switched automatically based on
the current video input signal - NTSC or PAL.
The color signals are output in the standard PAL format.
The color signals are output in the standard NTSC format.
Adjust Bass boost/cut frequency. Range of adjustment is +/-
12 dB.
Adjust Middle boost/cut frequency. Range of adjustment is +/
- 12 dB.
Function
Function
Function
19