Controls And Indicators - Jensen VM9414 Operating Instructions Manual

VM9414

CONTROLS AND INDICATORS

1. OPEN
Press to activate the automatic mechanical system and move the TFT monitor
into viewing position. Press again to close the TFT.
2. BAND
Press to change between three FM and two AM bands.
3. Disc Slot
4. WIDE/PICTURE
During video playback, press to adjust the display aspect of the picture to one
of two settings: Full, Normal or STANDBY.
Press and hold to access the "Picture Menu" (see "Picture Adjustment" on
page 10). Use the / buttons to adjust the brightness level from 0 (least
bright) to 20 (most bright).
5. TILT/ /
Press to adjust the screen angle up/down. Press and hold for continuous
angle adjustment.
Press to adjust the brightness level when "Picture Menu" is visible.
6. Eject
Press to eject a disc.
Press and hold to reset core mechanism position.
7. LCD Display
8. DISP
Press to view alternate LCD display information.
9. IR Remote Control Receiver
10. SRC/ (power)
Press to turn the unit on. Press and hold to turn the unit off.
When on, press to select source or return to "Source" screen.
11. VOL Rotary Encoder
Rotate to adjust the volume from 0-40.
Press and access the EQ menu to select a preset EQ level or adjust individual
audio settings.
12. Reset
Press to reset system settings to factory default (except the password and
parental lock setting).
13. 3.5mm A/V Input
Attach a compatible A/V device.
5