Aspect Ratio; Picture Adjustment; Parking Brake Inhibit - Jensen VM9414 Operating Instructions Manual

Aspect Ratio

Press the WIDE button (4) on the monitor to adjust the aspect ratio as follows:

Picture Adjustment

To adjust monitor display settings, perform the following steps:
1. Press the PIC button (24) on the remote control or press and hold the
WIDE/PICTURE button (4) on the monitor to view the "Picture Menu".
2. Use the /
to 20 (most bright).
3. Wait 5 seconds, or press the PIC button (24) on the remote control or the
WIDE/PICTURE button (4) on the monitor to exit the picture menu.

Parking Brake Inhibit

When the pink "PARKING" wire is connected to the vehicle Parking Brake
circuit, the front TFT monitor will display video when the Parking Brake is
engaged. (When the pink wire is grounded via the Parking Brake circuit, video
will be displayed.)
FULL
The entire screen is extended
horizontally to the aspect ratio of 16
to 9. The extension ratio is the same
at any point.
NORMAL
The conventional display image has
a 4 to 3 ratio of horizontal to vertical,
leaving a blank area on the right and
left sides of the display.
STANDBY
Screen becomes black. Touch
screen to resume.
buttons to adjust the brightness level from 0 (least bright)
10
VM9414