Pc Health Status - Foxconn A74GA Series User Manual

PC Health Status

Warning Temperature
Shut Down Temperature
Case Open Warning
CPU Temperature
System Temperature
CPU Fan Speed
System Fan Speed
NB Fan Speed
CPU Core Voltage
DRAM Voltage
+5.00V
+12.0V
CPU Smart Fan Function
Off PWM Temperature
Start PWM Temperature
Start PWM Value
Slope PWM Value
System Smart Fan Function
↑↓←→:Move Enter:Select
► Warning Temperature
This option is used to set the warning temperature for the system. When the temperature of
CPU is higher than the set value, the motherboard will warn by beep or speaker.
► Shut Down Temperature
This item is used to set the system temperature upper limit. When the temperature exceeds
the set value, the system will shut down automatically.
This function works only when your operating system is supporting ACPI.
► Case Open Warning
This item is used to enable or disable case open warning function. If your chassis support
Case Open function, enable this item. It halt and show some warning message on POST after
your chassis be opened.
► CPU/System Temperature
The CPU/System temperature are automatically detected and displayed by the system.
► CPU Fan/System/NB Fan Speed
The CPU fan/System fan speed are automatically detected and displayed by the system.
► CPU Core/DRAM Voltage/ +5.0V/+12.0V
The current voltages are automatically detected and displayed by the system.
► CPU Smart Fan Function / System Smart Fan Function/NB Fan Function
This option is used to enable or disable smart fan function. If your fan is 4 pin fan, you'd better
enable this for suitable temperature and low fan noise.
Set "CPU Smart fan function"/"System Smart fan function"/"Nb fan function" to [ena-
bled], the following items appear:
► Off PWM Temperature
It allows you set a temperature value from which smart fan stops its operation.
► Start PWM Temperature
It allows you set a temperature value from which smart fan starts its operation.
► Start PWM Value
It allows you to set an initial PWM value to drive the fan when the temperature reaches Start
value and smart fan begins its operation. The higher PWM value can achieve the faster fan
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
+/-/:Value
F9:Optimized Defaults
PC Health Status
[Disabled] [Disabled]
[Disabled]
[Disabled]
:40 C/104 F
o o
:23 C/73 F Disabled
o o
:3169 RPM 50
o
:N/A 55
o
:N/A 60
o
:1.416 V 65
o
:1.584 V 70
o
75
o
:4.919 V 80
o
:12.126 V 85
o
[Enabled] 90
[000]
[035]
[064]
[2 PWM]
[Enabled]
F10:Save ESC:Exit
41
Help Item
Options
C/122 F
o
C/131 F
o
C/140 F
o
C/149 F
o
C/158 F
o
C/167 F
o
C/176 F
o
C/185 F
o
C/194 F
o o
F1:General Help