Location - Henny Penny HHC-990 Operator's Manual

2-2. UNPACKING (Continued)

2-3. LOCATION

2-2
4. Open doors and remove packing from behind racks and
the water pan in the bottom of the unit.
5. Peel off any protective covering from the exterior of the
cabinet.
6. The cabinet is now ready for location and use.
Place the humidified holding cabinet in an area that allows
the doors to be opened without interference of loading and
unloading product. Also, keep the unit level for proper
operation.
No minimum clearances are required for the rear and
sides of the cabinet.
Model HHC-990
303