Installing And Connecting The Outdoor Unit Drain Hose (Except The Cooling Only Models); Fixing The Unit In Position - Samsung AQ09NBMD Owner's Instructions Manual

I O U
NSTALLING THE UTDOOR NIT

Installing and Connecting the Outdoor Unit Drain Hose (Except the cooling only models)

Drain hole

Fixing the Unit in Position

506 mm
Rubber leg
38
E-
When using the air conditioner in the Heat mode, ice may
accumulate. During de-icing, the condensed water must be drained
off safely. Consequently, you must install a drain hose on the outdoor
unit, following the instructions below.
1 Insert the drain plug into the drain hole on the underside of the outdoor
unit.
2 Connect the drain hose to the drain plug.
3 Ensure that the drained water runs off correctly and safely.
The outdoor unit must be installed on a rigid and stable base to
avoid any increase in the noise level and vibration, particularly if the
outdoor unit is to be installed close to a neighbour.
If it is to be installed in a location exposed to strong winds or at a height,
the unit must be fixed to an appropriate support (wall or ground).
1 Position the outdoor unit so that the air flow is directed towards the
outside, as indicated by the arrows on the top of the unit.
2 Attach the outdoor unit to the appropriate support using anchor bolts.
3 If the outdoor unit is exposed to strong winds, install shield plates around
the outdoor unit, so that the fan can operate correctly.
➢ Certainly fix up its rubber leg, in order to prevent its vibration
and noise.