Cooling Your Room - Samsung AQ09NBMD Owner's Instructions Manual

Cooling Your Room

You must select the Cool mode if you wish to adjust the:
◆ Cooling temperature
◆ Fan speed when cooling
1
If necessary, press the
◆ The 5 Way indicator on the indoor unit lights up.
Result:
◆ The air conditioner starts up in the mode selected
when the unit was last used.
◆ The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆ Plugged in
◆ Stopped
lt will start up normally after three minutes.
2 If the is not displayed at the top of the remote control,
press the button on the remote control one or more times until it appears.
◆ The indoor unit beeps each time you press the
Result:
◆ The air conditioner runs in the COOL mode.
➢
You can change modes at any time.
3 To adjust the temperature, press the
until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
◆ Each time you press the
Result:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆ The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature;
the fan will, however, operate.
4
Select the fan speed by pressing the
until the required setting is displayed:
Automatic (rotated :
Low
Medium
High
Result: Each time you press the
5
To control the direction of the air flow, refer to pages 16 and 17.
(On/Off) button.
buttons one or more times
buttons:
button one or more times
button, the indoor unit beeps.
button.
)
11
E-